6000 Series Aluminium Solid Round Bar

Nkọwa dị mkpirikpi:

6000 usoro aluminum mkpara na-anọchi anya na 6061 na 6063 tumadi nwere abụọ ọcha, magnesium na silicon, otú uru nke 4000 usoro na 5000 usoro na-lekwasị.Ọ dị mfe ịrụ ọrụ nke ọma, dị mfe uwe, yana ezigbo ọrụ.

Zitere anyị email

Nkọwa ngwaahịa

Mkpado ngwaahịa

Nkọwa ngwaahịa

Ihe ndị bụ isi alloying nke 6061 aluminum mkpanaka bụ magnesium na silicon, na-etolite usoro Mg2Si.Ọ bụrụ na o nwere ụfọdụ manganese na chromium, ọ nwere ike wepụ mmetụta ọjọọ nke ígwè;mgbe ụfọdụ a na-agbakwunye obere ọla kọpa ma ọ bụ zinc iji mee ka ike nke alloy dịkwuo mma n'emeghị ka ọ dị ntakịrị ibelata nguzogide corrosion ya;a ka nwere obere ihe na-eduzi.Ọla kọpa iji mebie mmetụta ọjọọ nke titanium na ígwè na eletriki eletrik;zirconium ma ọ bụ titanium nwere ike nụchaa ọka ma na-achịkwa nhazi recrystallization;iji meziwanye igwe, enwere ike ịgbakwunye ndu na bismuth.6061-T651 bụ isi alloy nke 6 usoro alloy, na ọ bụ a elu-edu aluminum alloy ngwaahịa nke meworo okpomọkụ ọgwụgwọ na tupu ịgbatị.Ọ bụ ezie na ike ya enweghị ike iji ya tụnyere usoro 2XXX na usoro 7XXX, magnesium na silicon alloys nwere ọtụtụ njirimara na arụmọrụ nhazi magburu onwe ya, njirimara ịgbado ọkụ dị mma na electroplating, ezigbo nguzogide corrosion, ịdị elu siri ike na enweghị nrụrụ mgbe nhazi, nnukwu ihe na-enweghị ntụpọ na mfe polishing, mfe agba film, magburu onwe oxidation mmetụta na ndị ọzọ magburu onwe àgwà.

6063 aluminum mkpanaka bụ ala alloyed Al-Mg-Si usoro elu plasticity alloy.Ọ nwere ọtụtụ atụmatụ bara uru:

1. Na-ewusi ike site na ọgwụgwọ okpomọkụ, mmetụta siri ike dị elu, na enweghị mmetụta na-efu efu.

2. Na magburu onwe thermoplasticity, ọ nwere ike extruded na elu ọsọ n'ime mgbagwoju, mkpa-walled na oghere profaịlụ ma ọ bụ forged n'ime forgings na mgbagwoju Ọdịdị, obosara quenching okpomọkụ nso, ala quenching uche, mgbe extrusion na forging demoulding, dị ka ogologo oge okpomọkụ. dị elu karịa quenching okpomọkụ.Enwere ike imenyụ ya site na ịgba mmiri ma ọ bụ ntinye mmiri.Akụkụ ndị nwere mgbidi (6<3mm) nwekwara ike imenyụ ikuku.

3. Ọmarịcha ịgbado ọkụ na-eguzogide corrosion, enweghị nchekasị corrosion cracking ọchịchọ.N'ime ihe ndị na-ekpo ọkụ na-ekpo ọkụ na-eme ka aluminom dị ike, Al-Mg-Si alloys bụ nanị alloys ndị na-ahụghị nrụgide corrosion cracking.

4. N'elu mgbe nhazi dị nnọọ mma ma dị mfe anodize na agba.

Ngwakọta kemịkalụ na akụrụngwa akụrụngwa nke mkpanaka aluminom 6061

Al	Si	Cu	Mg	Zn	Mn	Cr	Fe	Ti
Nkwenye	0.4-0.8	0.15-0.4	0.8-1.2	0.25	0.15	0.04-0.35	0.7	0.15

Ike tensile σb	≥180MPa
Ike mpụta σ0.2	≥110MPa
Mgbatị δ5 (%)	≥14
Ọnụego ngbanwe	68.9 GPA
Ike mgbada kacha	228 MPa
Ịme Ike Mpụta	103 MPa
Ike ike ọgwụgwụ	62.1 MPa
Ụdị nha	dayameta: ≤150

Chemical mejupụtara na n'ibu Njirimara nke 6063 aluminum mkpanaka

Al	Si	Cu	Mg	Zn	Mn	Cr	Fe	Ti
Nkwenye	0.2-0.6	0.1	0.45-0.9	0.1	0.1	0.1	0.35	0.1

Ike tensile σb (MPa)	130 ~ 230
Ike tensile kacha nke 6063	124 MPa
Ike na-enye ike	55.2 MPa
Ogologo oge	25.0%
Ọnụego ngbanwe	68.9 GPA
Ịme Ike Mpụta	103 MPa
Oke Poisson	0,330
Ike ike ọgwụgwụ	62.1 MPa